User manual

Select the available options by means of
buttons 3, 4, 5 and 6
Depending on the programme, different op-
tions can be combined. These must be se-
lected after choosing the desired pro-
gramme and before starting the programme.
When these buttons are pressed, the corre-
sponding pilot lights illuminate. When they
are pressed again, the pilot lights go out. If
an incorrect option is selected, the integrated
red pilot light of the button 7 flashes 3 times
and the message Err is displayed.
For the compatibility among the washing
programmes and the options see chapter
«Washing programmes» .
Start the programme by pressing button
7
To start the selected programme, press this
button; the corresponding green pilot light
stops blinking.
The pilot light 9 illuminates to indicate that the
appliance starts operating and the door is
locked.
If you have chosen a delayed start, the ma-
chine will begin the countdown.
Important! If an incorrect option is selected,
the message Err is displayed for a few
seconds and the red pilot light of this button
blinks 3 times.
Select the Delay Start by pressing
button 8
Before you start the programme, if you wish
to delay the start, press this button to select
the desired delay.
The selected delay time value will appear on
the display for a few seconds, then the du-
ration of the programme will appear again.
You must select this option after you have set
the programme and before you start the pro-
gramme.
You can cancel or modify the delay time at
any moment, before you press button 7 .
Selecting the delay start :
1. Select the programme and the required
options.
2. Select the delay start by pressing button
8 .
3. Press button 7 :
- the machine starts its hourly count-
down.
- the programme will start after the se-
lected delay has expired.
Cancelling the Delay Start after having star-
ted the programme:
1. Set the washing machine to PAUSE by
pressing button 7 .
2. Press button 8 once. On the display will
appear
' .
3. Press button 7 again to start the pro-
gramme.
Important!
• The selected delay can be changed only
after selecting the washing programme
again.
• The door will be locked throughout the de-
lay time. If you need to open the door, you
must first set the washing machine to
PAUSE by pressing button 7 and wait a
few minutes before opening the door. After
you have closed the door, press the same
button again.
Important! The Delay Start cannot be
selected with DRAIN programme.
Altering an option or a running
programme
It is possible to change some options before
the programme carries them out.
Before you make any change, you must
pause the washing machine by pressing but-
ton 7 .
Changing a running programme is possible
only by resetting it. Turn the programme se-
lector dial to
and then to the new pro-
gramme position. Start the new programme
by pressing button 7 again.
The washing water in the tub will be not emp-
tied out.
Interrupting a programme
Press the button 7 to interrupt a programme
which is running, the corresponding pilot
light starts blinking. Press the button again to
restart the programme.
Cancelling a programme
Turn the selector dial to
to cancel a pro-
gramme which is running. Now you can se-
lect a new programme.
Opening the door after the programme
has started
First set the machine to pause by pressing
the button 7 .
If the pilot light 9 blinks and after a few mi-
nutes goes off, the door can be opened.
12