User manual

31
Securing the Appliance to the Cabinet
1. Open the oven door.
2. Fasten the oven to the cabinet placing the four
distance holders (letter A) which fit exactly into
the holes in the frame and then fit four wood
screws (letter B).
Instructions for building in
Please ensure that when the oven is installed
it is easily accessible for the engineer in the
event of a breakdown.
Building In
The surround or cabinet into which the oven will be
built must comply with these specifications:
 the dimensions must be as shown in the relevant
diagrams;
 the materials must withstand a temperature
increase of at least 60°C above ambient;
 proper arrangements must be made of a
continuous supply of air to the oven to prevent
the oven overheating.
Dimensions of the oven and recess required are
given in the relevant diagrams.
550 MIN
593
560 - 570
80÷100
Dimensions are given in millimetres
When installing a hob over the oven,
the hob electrical connection and the
oven one have to be carried out
separately for security reasons and
to let the oven be taken off the cabinet
easier, if necessary. Any extensions
must be made with cables suitable
for the required power.