User manual

24
Shelf Supports and Catalytic Panels
Be careful when removing the
telescopic shelf supports. The
catalytic panels are not fixed to the
oven walls and may fall out when the
shelf supports are removed.
The shelf supports and the catalytic panels can
be removed for easy cleaning.
Make sure the appliance has cooled
down completely before cleaning.
Proceed as follows :
1. Use one hand to pull on the front part of the
shelf support to remove it while keeping the shelf
support and catalytic panel in place with the
other hand (Fig. 1).
2. Hold the shelf support and catalytic panel in
place and at the same time unhook the shelf
support at the back (Fig.2).
3. Clean the shelf support with warm, soapy water
and wipe it with a soft cloth.
Never use abrasive products which could
damage it.
4. Once you have finished cleaning assemble the
shelf support and catalytic panel and replace it
again (reverse the steps above) - (Fig. 3).
Check that the hooks are engaged properly when
you replace the shelf support and catalytic panel.
1
2
3