Data Sheet

4
15 mm min.
29 mm min.
Minimum area
(for all PCSA models)
PCSA-1N PCSA-2N PCSA-4N
BRIDGE = 0 SPLINT = 2BRIDGE = 1 SPLINT = 2BRIDGE = 1 SPLINT = 4
BRIDGE = 1 SPLINT = 6
PCSA Circuit board holder
Combinations and work surface in mm
FEATURE:
• Circuit board holders of the PCSA series are the ideal tool for tting circuit boards
with components. The holder can easily be demounted in single parts and be
reassembled in different combinations.
• The standard models PCSA-1N/2N/4N are equipped with 1 removable middle
bridge and 2 adjustable splints. Thus two work areas can be created.
• Any circuit board holders can be tted with additional subdivisors (4 for PCSA-
1N/2N and 6 for PCSA-4N). That way small circuit boards can be used on several
levels.