Datasheet

ManualsBrandsIdeal Tek ManualsHand ToolsKit of 5 SMD Tweezers, Stainless Steel

swiss made

www.ideal-tek.com

SMD Twezeers

» Smooth handling and positioning of all SMD components

» Dierent tips and angles for specic applications

» Satin antiglare nish and ergonomic design

» Good corrosion resistance to most chemicals & acids

» Available as reverse action model

SM100.SA

4 1/2” 115 mm

Reverse action tweezers for handling SMDs for PCBs

SM102.SA

4 1/2” 115 mm

Reverse action tweezers for soldering and de-soldering 20, 28, 44 and 68 LCCC and PLCC pad devices

SM101.SA

4 1/2’’ 115 mm

Reverse action tweezers for soldering and de-soldering 8, 14 or 16 Lead SMDs

SM103.SA

4 1/2’’ 115 mm

For handling and positioning 2 and 3 lead SOT packages at 45° angle

Summary of content (4 pages)

PAGE 1
swiss made SMD Twezeers »» Smooth handling and positioning of all SMD components »» Different tips and angles for specific applications »» Satin antiglare finish and ergonomic design »» Good corrosion resistance to most chemicals & acids »» Available as reverse action model SM100.SA 4 1/2” 115 mm Reverse action tweezers for handling SMDs for PCBs SM101.SA 4 1/2’’ 115 mm Reverse action tweezers for soldering and de-soldering 8, 14 or 16 Lead SMDs SM102.
PAGE 2
swiss made SM104.SA 4 3/4’’ 120 mm For handling and positioning 3 lead SOT packages, monolithic chip capacitors, etc. SM105.SA 4 3/4’’ 120 mm Special design for positioning all SOT packages vertically SM106.SA 4 3/4’’ 120 mm For positioning all SOT packages horizontally; flat base tips (4 mm long) SM107.SA 4 3/4’’ 120 mm For positioning all flat devices at 60° angle SM108.SA 4 3/4’’ 120 mm For positioning and soldering 1mm wide components www.ideal-tek.
PAGE 3
swiss made SM109.SA 4 /4’’ 120 mm Same as SM108 but with 45° tips without anti-crush feature SM110.SA 4 3/4’’ 120 mm For positioning monolithic chips capacitors, grooved tips SM111.SA 4 3/4’’ 120 mm For positioning 5 mm monolithic chip capacitors; flat base grooved tips ( 2 mm long) SM112.SA 4 3/4’’ 120 mm For positioning 5 mm monolithic chip capacitors at 60°, grooved tips SM113.SA 4 3/4’’ 120 mm 3 mm long tips bent at 60° angle one forked blade lead entry www.ideal-tek.
PAGE 4
swiss made SM114.SA 4 3/4’’ 120 mm Same as SM113 but with straight tips for vertical holding SM115.SA 4 3/4’’ 120 mm Grooved tips at 30° angle for holding and positioning cylindrical devices (up to 0.5 mm diam.) SM116.SA 4 3/4’’ 120 mm Grooved straight tips, for vertical positioning of cylindrical devices (up to 0.5 mm diam. or more) SM117.SA 4 3/4’’ 120 mm For positioning SOT packages at 30° angle K5SMDF SMD precision tweezers set SM103, SM107, SM108, SM111, SM115 in top quality hard/foam wallet www.