Datasheet

www.ideal-tek.com
swiss made
This document contains information based on average values as obtained from the results of laboratory tests and observations made on the material.
Ideal-Tek SA declines all responsibility from an improper use of the product described in this document.
Precision High performance Ceramic
TECHNICAL DATA SHEET
General notes:
» Partially stabilized zirconia (PSZ)
» both hard and fracture tough
» ne grain size: excellent surface nish and able to hold sharp edge
» relatively low density
» no open porosity
» good abrasion and wear resistance
» superior exural strength and fracture toughness
» good thermal properties and good temperature stability
» extreme corrosion resistance, nearly chemically inert
» electrically insulative until 400-500°C
Thermal conductivity
2.0 W/m∙K
Coef. of lin. therm expansionl:
10.0 E-6/K
Max working temperature
1200°C
Shock resistance, behaviour
Good
Flexural modulus
200 GPa
Flexural strength
1200 MPa
Vickers Hardness
12 GPa
Mechanical properties
Volume resistivity
>10
12
Ohm∙cm
Electrical properties
Thermal properties
Density
6.00 g/ccm
Open porosity
0.0%
Water absorption
0.0%
Color
white
Other properties