Datasheet

www.ideal-tek.com
swiss made
This document contains information based on average values as obtained from the results of laboratory tests and observations made on the material.
Ideal-Tek SA declines all responsibility from an improper use of the product described in this document.
Industrial coating type T
TECHNICAL DATA SHEET
General notes:
» This solvent-based liquid Teon
®
coating is formulated with special blends of uoropolymers and other high-
performance resins to improve toughness and abrasion resistance
Nonstick
Very few solid substances will permanently adhere to a Teon
®
nish. Although tacky materials may
show some adhesion, almost all substances release easily
Low coefcient of friction
The coefcient of friction of this Teon
®
coating is generally in the range of 0.20 to 0.25, depending on
the load, sliding speed, and particular Teon
®
coating used
Nonwetting
Since surfaces coated with Teon
®
are both oleophobic and hydrophobic, they are not readily wetted.
Cleanup is easier and more thorough — in many cases, surfaces are self-cleaning
Heat resistance
Can operate continuously at temperatures up to 150°C and can be used for intermittent service up
to 200°C
Unique electrical properties
Over a wide range of frequencies, Teon
®
has high dielectric strength, low dissipation factor, and very
high surface resistivity
Cryogenic stability
Many Teon
®
industrial coatings withstand severe temperature extremes without loss of physical
properties. Teon
®
industrial coatings may used at temperatures as low as -270°C/-454°F
Chemical resistance
Teon
®
is normally unaffected by mild chemical environments. It has good resistance to diluted acids,
diluted and concentrated alkalis and organic solvents