Datasheet

www.ideal-tek.com
swiss made
This document contains information based on average values as obtained from the results of laboratory tests and observations made on the material.
Ideal-Tek SA declines all responsibility from an improper use of the product described in this document.
Superalloy NC
TECHNICAL DATA SHEET
General notes:
» Ni-Cr-Mo superalloy
» excellent strength from room temperature to 800 °C
» very high shape retention
» resistant to fatigue
» fully non-magnetic (100%)
» excellent corrosion resistance to most chemicals, salts and acids
» typical applications include non-magnetic tools for electronic and watch industry applications and for laboratory and
medical applications in aggressive chemical and extreme environments (aerospace, nuclear, marine)
State
50% cold reduction
Density
8.4 g/cm
3
Hardness Vickers 10
220
Tensile strength, ultimate
925 MPa
Tensile strength, yield
485 MPa
Elongation, break
50%
Modulus of elasticity
208 GPa
Mechanical properties
Resistivity
1.29 E-4 Ohm.cm
Electrical properties
Coef. of lin. therm expansion
12.8 E-6/°C
25°C-100°C
Coef. of lin. therm expansion
13.4 E-6/°C
25°C-300°C
Specic heat capacity
0.41 J/(g∙K)
Thermal conductivity
10 W/(m∙K)
Continuos use temperature
600°C
Max service temperature, air
980°C
Thermal properties