Datasheet

www.ideal-tek.com
swiss made
This document contains information based on average values as obtained from the results of laboratory tests and observations made on the material.
Ideal-Tek SA declines all responsibility from an improper use of the product described in this document.
Engineering coating type DN
TECHNICAL DATA SHEET
General notes:
» PVC FOAM
» very soft and elastic, good tear resistance
» very good abrasion/wear resistance (improved life-time)
» good chemical resistance (oils, grease, fuels, acids, detergents and soaps, alcohols )
» electrically static dissipative, ESD-safe material!
» typical applications include ESD-safe handles, oor and work surface mats
Maximum Service Temperature, Air
70 °C
Minimum Service Temperature, Air
-150 °C
Hardness, Shore A
56.7
Tensile Strength, Ultimate
7.60 MPa
Tensile Strength, Yield
0.317 MPa
Elongation at Break
171 %
Mechanical properties
Surface Resistivity
10
9
-10
10
Ohm
Electrical properties
Thermal properties
Density
0.530 g/cc
Water Absorption
2.86 %
Physical Properties Metric