Datasheet

www.ideal-tek.com
swiss made
This document contains information based on average values as obtained from the results of laboratory tests and observations made on the material.
Ideal-Tek SA declines all responsibility from an improper use of the product described in this document.
Engineering coating type DR
TECHNICAL DATA SHEET
General notes:
» thermoplastic vulcanizate TPV
» very soft and elastic, good tear resistance
» outstanding abrasion/wear resistance (improved life-time)
» good chemical resistance (oils, grease, fuels, acid, detergents and soaps )
» good hydrolytic resistance (hot water)
» electrically static dissipative, low surface resistivity (10
8
-10
9
Ohm), ESD-safe material!
» recommended for use in controlled environments
» ideal for repetitive handling tasks in specimen preparation, electronics, instrumentation, laboratories and
forensics. Especially useful for handling ESD sensitive components or small static items
Hardness, Shore A 36
Tensile Strength 20.3 kg/cm2 ASTM 412C, 23°C
Tear Strength 12.1 kg/cm ASTM 624C, 23°C
Elongation at break 452.5 % ASTM 412C, 23°C
Melt Flow Index 42E g/10min ASTM D1238, 23°C
Mechanical properties
Electrical properties
Thermal properties
Density 0.9 g/cm3 ASTM D792
Other properties
Melt Flow Index:
B: 125°C/2.16kg C: 150°C/2.16kg E: 190°C/2.16kg G: 200°C/5kg
Surface Resistivity 10
8
-10
9
Ohm ICE60093
Continuous Use Temperature 50° C 96 h
Short Time Temperature 50° C 36 h