Installation Guide

SK618 / SK678 Instruction Manual – Rev 2017/06
www.idealinc.com
Page 3
1.3. Components
1- Antenna jack
2- Telephone line jack
3- Antenna
4- Low battery indicator LED
5- AC power indicator LED
6- LCD display
7- Keypad
8- Alarm and chime speaker
9- DC 9V jack
10- Home mode button
11- Battery cover
12- External trigger input/output terminal
13- 9V battery (not included – we
recommend using an alkaline battery)
14- Reset button
2. Set-up
Install the alarm centre where it will have access to a telephone land-line and an electrical outlet.
1. Plug in the AC adaptor, and connect it to the DC 9V jack (Fig. 1)
2. Using the supplied telephone cable, connect the small plug into the LINE jack on the alarm
centre and the other end into the phone jack (Fig. 2).
3. You may also choose to use the included telephone line splitter to connect both the alarm
center and a telephone into the same phone jack. You can use the line splitter either at the wall
jack (Fig. 3) or at the LINE jack on the alarm centre (Fig. 4).