SDS

NEW LEADER BATTERY LIMITED.
Safety Data Sheet for Lithium Button Cell Series
Document Number: SDS-CR Coin Cell Not for recharge
不可充電
(Version : 2016)
January .2016
vents on batteries, Encapsulation of batteries will not allow cell venting and can cause high pressure rupture.
機械密封 : 電池必須在一個防氣和空氣況下做焊接或密封之加工,咨詢達電有限公司查詢全建
.不要忽略開封池之安全.之電是不外殼起高壓擊.
Handling: Accidental short circuit for a few seconds will not seriously affect the battery. Prolonged short circuit will
cause the battery to lose energy, generate significant heat and can cause the safety release vent to open. Source of
short circuits include jumbled batteries in bulk containers, metal jewelry, metal covered tables or metal belts used
for assembly of batteries into devices. Damaging a lithium battery may result in an internal short circuit.
: 路對電池會有重之影響間會池之容量構成影響產生影響安全. 其他電池或
金屬混合鋰電,產生短, 之鋰池在結構內會形成.
The contents of an open battery, including a vented battery, when exposed to water, may result in a fire and/or
explosion. Crushed or damaged batteries may result in a fire.
理已封之電池 : 有開的電池, 電池水中,火警使電池爆炸, 撞擊電池有
火警
If soldering or welding to the battery is required, consult us for proper precaution to prevent seal damage or short circuit.
接或加工 產商咨詢電池或電池生短
Charging: This battery is manufactured in a charged state. Its is not designed for recharging. Recharging can cause battery
leakage or in some case, high pressure rupture. Inadvertent charging can occur if a battery is installed backwards
: 產時足夠,電池是不用在電池, 電池再充電有電池漏液因高造成, 如不
電池電池反充.
SECTION 8 Exposure Controls / Personal Protection 接觸控制/個人保護
Ventilation Requirements 通風系統之要 : N.A.
Respiratory Protection 吸道保護: N.A.
Eyes Protection 眼睛保護 : N.A.
Gloves 手套 : N.A.
SECTION 9 Physical / Chemical Characteristics
物理
/
化學特性
Boiling Point 沸點 : N.A.
Specific Gravity (H2O = 1) : N.A.
Melting Point 熔點 : N.A.
Vapor Pressure 蒸氣 (mm Hg) : N.A.
Vapor Density 蒸氣 (AIR = 1) : N.A.
Evaporation Rate (Buty1 Acetate) : N.A.
Solubility in Water : N.A.
Appearance and Odor 形狀和氣 , Cylindrical Shape, Odorless 圓柱 :
PDF created with pdfFactory Pro trial version www.pdffactory.com