Instructions / Assembly

Rev. 10/05/2012
5. PAUSE FUNCTION
The "PAUSE" function can be stored as one digit in the telephone number memory
for some dialing operations. Every one PAUSE in the memory dialing sequence will
pause for 3.6 seconds. For example, if you want to store telephone number 514-363-1030
EXTENSION 230 to a memory location, the operation will be as follows:
a. Enter password then press PROG button twice (2).
b. MEMORY will flash on the auto-dialer screen.
c. Press ARM/DISARM button to confirm.
d. Press */UP or #/DOWN button to select a memory location.
e. Enter 5143631030 DEL./PAUSE (hold for 2 seconds until the letter F
appears on the screen, then enter 230.
f. Press ARM/DISARM button to confirm.
g. Press PROG
button eight (8) times to exit set-up mode.
6. TO PROGRAM SIREN ON/OFF
The auto-dialer has been factory pre-set with the siren ON. To turn the siren OFF:
a. Enter password followed by PROG button four (4) times.
b. The " " icon will flash on the auto-dialer screen. (Fig.7)
c. Press ARM/DISARM to confirm.
d. Using */UP
or #/DOWN buttons to select SOUND OFF. Followed by
ARM/DISARM
button to confirm.
e. Press PROG
button six (6) times to exit the set-up mode.
7. TO PROGRAM AUTO CALL FUNCTION ON/OFF
The auto-dialer has been factory pre-set with the call option ON. If you do not want the
auto dialer to call out change this to OFF:
a. Enter password followed by PROG
button five (5) times.