Instructions / Assembly

Rev. 10/05/2012
e. Enter correct year by pressing */UP or #/DOWN button, then press the
ARM/DISARM button. The next set of numbers will start flashing, enter the
month by pressing */UP or #/DOWN button, then press the button
ARM/DISARM , and so on until all numbers have been entered. You will
now have the correct date and time.
f. Press PROG button once (1) to exit set-up mode.
3. TO PROGRAM EMERGENCY TELEPHONE NUMBERS
All stored telephone numbers will be dialed, in sequence, the complete amount of cycles
programmed. For example if you program 5 telephone numbers and set the cycle to 2, all
5 phone numbers will be dialed twice regardless if one of the calls is answered or not. Do
not enter your own home phone number, as the auto dialer uses your phone line to dial, it
will not work. You must also enter complete phone numbers including area codes, and if
long distance, include the 1.
a. Enter password followed by PROG button twice (2).
b. MEMORY will flash on the auto-dialer screen. (Fig.6)
c. Press ARM/DISARM button to confirm.
d. You are now ready to program up to 5 emergency telephone numbers. Press the
*/UP or #/DOWN buttons to select memory location from 1 to 5. The
numbers will be dialed in the number sequence that they are entered.
e. Enter the telephone number you would like to store, followed by
ARM/DISARM to confirm (maximum of 32 digits, but only displays last 16
digits).
f. Repeat steps c to e for the four other numbers you may wish to store.
g. Press PROG button eight (8) times to exit the set-up mode.
4. TO DELETE A TELEPHONE NUMBERS FROM MEMORY
a. Enter password followed by PROG
button twice (2).
b. MEMORY will flash on the auto-dialer screen. (Fig.6)
c. Press ARM/DISARM button to confirm.
d. Press */UP or #/DOWN buttons to select the number you want to delete.
e. Press DEL./PAUSE
button to delete the number.
f. Press the ARM/DISARM
button to confirm.
g. Press PROG button eight (8) times to exit the set-up mode.