Instructions / Assembly

Rev. 10/05/2012
Depending on your specific needs, priority must be given to either the answering machine
or “REMOTE ACTIVATION”
If you intend to use the “REMOTE ACTIVATION” features (controlling the alarm unit
remotely), you cannot use an answering machine in the usual way.
To use the remote activation feature: Set the auto dialer to respond (pick up) before your
answering machine responds. For example, if your answering machine is set to pick up
after 5 rings then set the auto dialer to pick up after 3 rings, this way your AUTO
DIALER will pick up first, allowing you to enter your key selection.
Complete instructions on
setting up the remote activation follow.
If the answering machine is required, then the remote activation feature cannot be
used. Set the auto dialer to respond after your answering machine normally responds (set
it to 10 rings) this will ensure that the answering machine is the first response.
IMPORTANT SAFETY TIPS
1. Do not install the system where it will be exposed to direct sunlight or rain.
2. The built-in siren is very loud, never put the system close to your ear.
3. The system should be installed away from heat sources such as radiators, heating ducts
and stoves.
4. If the system sounds at random, it is possible that the installed location is too close to a
heat source, changing the location or direction of the unit can correct the problem.
5. The system can provide valuable protection for your home and property if utilized
properly. However, this unit cannot guarantee complete protection against burglary or
property damage. Therefore, we will not be responsible for any losses or damages which
may occur, during use of this product.
DESCRIPTION OF COMPONENTS
1. Antenna Jack
2. Telephone LINE Jack
3. Antenna
4. Battery Low LED
5. Ex Power LED
6. LCD Display
7. Numerical Keys
8. Buzzer (built-in siren)
9. DC 9V Jack
10. Home mode button
11. Battery Cover
12. External Trigger Input Terminal
13. 9V Battery
14. RESET button
15. Remote control