Instructions / Assembly

DOOR THICKNESS
1"
1 1/4"
1 1/2"
1 3/4"
2"
2 1/8"
1. Print out this sheet using 1:1 scale.
2. Over lay handle spindle on top of the image.
3. Select the spindle that matches your door thickness.
The handle spindle has now been selected and is ready for installation.
HANDLE SPINDLE SELECTION
ALIGN CAP OF SPINDLE HERE
ALIGN CAP OF SPINDLE HERE
RULER FOR
DOOR THICKNESS
KEY LOCK SPINDLE PREPARATION
1. Print this sheet using 1:1 scale.
2. Over lay flat spindle against the image.
3. Mark door thickness on the spindle.
4. Cut off the portion of the spindle beyond the mark line.
The key lock flat spindle is now ready for installation.
PLACE SPINDLE HERE
LATCH SCREW SELECTION
DOOR THICKNESS
1"~1 1/4"
1 1/2"
1 3/4"
2"
2 1/8"
1. Print out this sheet using 1:1 scale.
2. Over lay screws on top of the image.
3. Select the screws that matche your door thickness.
The latch screws have now been selected and are ready for installation.
DEADBOLT SCREW SELECTION
DOOR THICKNESS
1"
1 1/4"
1 1/2"~1 3/4"
2"~2 1/8"
1. Print out this sheet using 1:1 scale.
2. Over lay screws on top of the image.
3. Select the screws that matche your door thickness.
The deadbolt screws have now been selected and are ready for installation.
PAGE 3 OF 4
SPINDLES AND SCREWS SELECTION