Instructions / Assembly

A
Template Placement and Drilling Instructions
1. Fold the template on the dotted line to 90
according to the handedness (left or right).
2. With the door in closed position,
place folded template on the inside of the door
so that the SIDE A is against the jamb
or metal z-bar, which ever projects out furthest;
and SIDE B is on the inside surface of the door.
3. Use a center punch to mark the position
of 6 holes on the inside surface of the door on SIDE B.
Mark the position of 4 holes on the jamb on SIDE A (for strikes).
4. Using a 5/16” drill bit, drill 6 holes straight through
door on SIDE B.
5. Using a 1/16"drill bit, drill 4 pilot holes to a depth of 1"
on the jamb on SIDE A.
JAMB
DOOR
DETAIL A
PAGE 2 OF 4