Operation Manual

5 SignalTEK CT 156840.02
En
HOME SCREEN
The HOME screen is displayed following start-up. (To return to the HOME screen from any other
screen, press Escape repeatedly until the HOME screen appears.)
When the Remote Unit Icon is displayed, indicating that the two units are connected together via the
cable to be tested, press Autotest at either end to start the tests.
Memory Status
Shows the number of
results stored / total
capacity
Battery Status:
Battery full
Battery
2
/
3
full
Battery
1
/
3
full
Battery empty
Mains / on charge
Current time
Data Test Icon
Indicates progress of the
Data Test. Highlight the
icon using the cursor
buttons and press Enter to
view the details of the Data
Test.
Cable length
(Indicated
after the tests
are complete)
Notifications Area
Shows the current activity or
status of the tester
Test Unit Icon
Remote Unit Icon
Indicates that the
Remote Unit is
connected to the Test
Unit
Wiremap Test Icon
Indicates progress of the
Wiremap Test. Highlight the
icon using the cursor
buttons and press Enter to
view the details of the
Wiremap Test.
Test Status:
Ready to test
Test in progress
Test Passed
Test Failed
Auto Save Selection
Highlight the icon using the
cursor buttons and press Enter
to select how results should be
saved
JOBS
Press F1 (JOBS) to
access the JOBS menu.
SETUP
Press F3 (SETUP) to
access the SETUP
menu.
Result Name
Shows the name of
the last saved result
Job Selection
Shows the currently
selected Job. Highlight the
icon using the cursor
buttons and press Enter to
select which Job to save
results to.
STOP / SAVE / NAME
Press F2 (STOP) to
interrupt the test, or
(SAVE) to save the result
manually, or (NAME) to
edit the name format of the
subsequent test results