Data Sheet

Proof of Performance
3
Pinpoint Cable Faults and Minimise Downtime
One of the main causes to network downtime is caused by cable faults. The NaviTEK IE has a series of advanced wiremap
tools for PROFINET and standard Ethernet IP network cabling:
Copper Cabling
Using the RJ45 or M12 interfaces the NaviTEK IE oers a wiremap specifically designed for PROFINET Industrial Ethernet
networks and Standard Ethernet networks.
• Displays the correct wiring colours for the protocol used
• Supported cable types – 4 twisted wires / 2 twisted pairs / 4 twisted pairs
• Measures the cable length
• Determine where and what the cable fault is including split pairs/opens/shorts/miswires.
Why is NaviTEK IE better than
other cable testers?
• Accurate distance to fault using Time Domain
Reflectometry (TDR)
• Tests every wire in the data cable not every pair to
help isolate issues that other testers cannot find
• Supports standard and non-standard cabling as the
wiremap can be customised to your specific cabling
Fibre Cabling
Using the optional SFP module the NaviTEK IE measures optical power and provides a good,
satisfactory or poor indication of received power.
• Poor power levels are a good indication of dirty connectors and kinked or damaged cabling
• An optional 100Mb/s SFP media converter is available to access a 100Mb/s optical link
(See back page for details)
2 x M12 D connector cables supplied as standard.
M12 X connectors available as accessories.
Copper
Cabling
Adapter
cable*
Adapter
cable*
M12RJ45 M12 RJ45
Copper
Cabling
RJ45 RJ45
Fibre
Cabling
SFP SFP
Cable Testing