Information

NaviTEK NT Plus
All the features of NaviTEK NT as
well as:
• Touchscreen
• Custom wiremap
• Autotest button performs a suite of
network tests: Internet connectivity
(Ping, DNS, Gateway, Traceroute) and
NetScan
• Network Probe (NET TEST) provides
detailed network information of each
device
• Port identification using
EDP/CDP/LLDP protocols
• VLAN detection and support
• Network scan (IP and MAC addresses
of devices)
• PoE/PoE+ load test
• Trac utilisation bar graph
• Internal memory for 5000 test reports
• Generate test reports (PDF or CSV)
• IDEAL AnyWARE mobile app
NaviTEK NT Pro
All of the features of NaviTEK NT Plus
as well as:
• Fibre optic cable interface
• Logon using the 802.1x protocol
• Optical power level and pass/fail
indication with supported SFP
• Loopback mode for transmission
testing on both copper and
fibre interfaces
NaviTEK NT
Performs tests for copper cabling and
networks, including:
• Display network configuration - IPv4 /
IPv6 compatible
• Advanced wiremap for miswires, split
pairs, opens and shorts
• Distance to opens and shorts (TDR)
• PoE/PoE+ detection
• Tone generator for cable tracing
• Autotest button performs Ping and
Traceroute test (network mode)
• Hub blink for port identification
• DHCP client
• Switch detection - 10/100/1000 Mb/s
• User-exchangeable RJ45 inserts
• Support for up to 12 wiremap remotes
• Backlit colour screen
Step 1
Test
• Create job folder
• Enter job site information
• Perform autotest on copper/fibre
cabling and copper/fibre networks
Step 2
Connect
• Activate NaviTEK NT wireless hotspot
• Connect your mobile phone or tablet
with the IDEAL AnyWARE App
• Transfer test reports to your
mobile device
• View test reports
Step 3
Send
• Select reports (PDF or CSV) to send
• Select preferred transfer method –
email, ftp, cloud storage etc.
• Send file
• Alternatively save test reports to
USB key
Send test reports from anywhere using the free app
Download the FREE App today