Operation Manual

Testing Fibers
OTDR 45
Testing in Manual (Advanced) Mode
8. Select pulse as follows:
8a. Use the arrows to select the Pulse list and press Select to open
the list.
8b. Use the up/down arrows to select the desired pulse, and then
press Select.
9. Select duration of the acquisition as follows:
9a. Use the arrows to select the Duration list, and then press Select to
open the list.
9b. Use the up/down arrows to select the desired duration for the
acquisition, and then press Select to confirm.
10. Press Auto Test to start the acquisition.
You can stop the acquisition at any time by pressing Auto Test once
again.