Operation Manual

OTDR 35
Setting Storage Parameters
To set the file format:
1. Press Menu, select Setup > OTDR, and then
press Select.
2. Use the left/right function arrows until you
see Storage, and then display the pane
(F1/F2 key).
3. Use the arrows to select Default file format, and then press Select to
open the list.
4. Use the up/down arrows to select the desired format, and then press
Select to confirm.
To revert to the factory-default for file format and autonaming
scheme:
1. Press Menu, select Setup > OTDR, and then press Select.
2. Use the left/right function arrows until you see Storage, and then
display the pane (F1/F2 key).
3. Use the up/down arrows to select Default, and then press Select to
confirm.