Operation Manual

24 IDEAL
Setting General OTDR Parameters
To set the general OTDR parameters:
1. Press Menu, select Setup > OTDR, and then
press Select.
2. Display the General pane (F1/F2 key).
3. Use the up/down arrows to highlight the
desired item, and then press Select to
select it.
You can press Select one more time to clear the boxes.
To revert to the factory-default settings:
1. Press Menu, select Setup > OTDR, and then press Select.
2. From the General pane, use the arrows to select Default, and then
press Select to confirm.