Operation Manual

OTDR 15
4 Customizing Your OTDR
Selecting the Distance Units
There are three distance units available: meters, miles, and kilofeet.
Note: The attenuation values are always expressed in dBs per kilometer.
To select distance units:
1. Press Menu, select Setup > Unit, and then
press Select.
2. Use the left/right function arrows until you
see Regional Settings, and then press F2 to
display the pane.
3. Press Select to open the Distance unit list.
4. With the current distance unit highlighted, use the up/down arrows to
select the desired unit, and then press Select to activate it.