Operation Manual
NaviTEK NT Plus
All the features of NaviTEK NT as well
as:
• Autotest button performs a suite of
network tests
• Network Probe provides detailed
port and network information of each
device
• Port identification using
EDP/CDP/LLDP protocols
• VLAN detection and support
• Network scan
• Trac utilisation bar graph
• Internal memory for 5000 test
reports
• Generate test reports (PDF or CSV)
• Sent test reports from your mobile
device using the free IDEAL
AnyWARE App
NaviTEK NT Pro
All of the features of NaviTEK NT Plus
as well as:
• Fibre optic cable interface
• Logon using the 802.1x protocol
• Optical interface with power
indication
NaviTEK NT
Performs tests for copper cabling and
networks, including:
• Display network configuration - IPv4 /
IPv6 compatible
• Advanced wiremap for miswires, split
pairs, opens and shorts
• Distance to opens and shorts (TDR)
• PoE/PoE+ detection
• Tone generator for cable tracing
• Ping and Traceroute testing
• Hub blink for port identification
• DHCP client
• Switch detection - 10/100/1000 Mb/s
• User-exchangeable RJ45 inserts
• Support for up to 12 wiremap remotes
• Backlit colour screen
Download the FREE App today
Step 1
Test
• Create job folder
• Enter job site information
• Perform autotest on copper/fibre
cabling and copper/fibre networks
Step 2
Connect
• Activate NaviTEK NT wireless hotspot
• Connect your mobile phone or tablet
with the IDEAL AnyWARE App
• Transfer test reports to your
mobile device
• View test reports
Step 3
Send
• Select reports (PDF or CSV) to send
• Select preferred transfer method –
email, ftp, cloud storage etc.
• Send file
• Alternatively save test reports to
USB key
Send test reports from anywhere using the free app