Operation Manual
Network Troubleshooter
NaviTEK NT
The NaviTEK NT is a network tester for troubleshooting and maintenance
of active and passive copper and fibre networks. Incorporating an
improved graphical interface NaviTEK NT allows network technicians
to pinpoint and solve network connectivity issues faster than ever
before. Subsequently, tests can be saved as pdf reports and shared with
colleagues and clients using the free IDEAL AnyWare™ app.
Ethernet utilisation
Real time display of broadcast network
trac shown as a percentage of port
speed for the previous 60 minutes.
VLAN detection
& operation
Automatic detection of VLAN
ID’s allows the user to configure
NaviTEK NT for operation on a VLAN.
CDP/LLDP/EDP port
information
Show port information using Cisco
Discovery Protocol (CDP), Link Layer
Discovery Protocol (LLDP) and
Extreme Discovery Protocol (EDP).
Network Probe
View network illustration to verify test
results of each network component.
Netscan
Display list of IP and MAC addresses of
every device connected to the network.
Addressing the needs of today’s network technicians
Today, network technicians have a broad selection of software troubleshooting
tools at their disposal and whilst useful in certain situations and environments they
do have limitations. NaviTEK NT on the other hand oers a comprehensive suite of
test and troubleshooting functionality only found on dedicated hand-held testers:-
• Copper and fibre test interfaces
• Fast detection of link and IP information including duplex, speed, port ID,
VLAN, DNS, DHCP, Gateway status and IP address
• Detects services such as ISDN, POTS and PoE
• Accurate wire mapping including length measurement and distance to fault
• Rugged, compact design permits use in confined spaces
• Not susceptible to virus and malware attack
Press the Autotest button to
display summary information
and allow for detailed inspection
of network parameters.
Port & network
summary info