Operation Manual

NaviTEK NT 151844 Iss 2
User Guide Page 20
Generating and Uploading Reports
1. Reports can be generated and exported to a USB key.
To generate a report to USB:
• Insert a USB key into the NaviTEK NT USB port.
• From the home screen press F1 (JOBS). The display will show the Job List screen.
• Scroll down to select the required Job
• To generate a report for a single result, press ENTER to display the Results list, select
the required result, press ENTER, then TO USB (F3).
• To generate a report for a single Job select the required Job then press TO USB (F3).
• To generate a report for all Jobs, press OPTIONS (F2) then select ALL TO USB.
The dialogue ‘Result saved to USB’ appears. Reports are now saved on the USB
key in the selected format(s).
2. Reports can be generated and downloaded to a smartphone (only when no tests are
running).
To enable Wi-Fi for results transfer:
• Insert Wi-Fi dongle into the NaviTEK NT USB port.
• From the home screen press F1 (JOBS).
• The display will show the Job List screen. Wi-Fi connectivity is indicated by the top
bar on the NaviTEK NT screen changing from grey to blue:
Now the NaviTEK NT is ready for results transfer wirelessly.
Note
To minimise battery consumption the Wi-Fi connectivity is only enabled for 5 minutes
following power up and whenever the user is in the JOB screen.
To download results to an Android™ smartphone:
• Download and open IDEAL AnyWARE
TM
App from the Google Play™ Store.
• Search and connect to NaviTEK NT. The SSID will be of the form "IDEALN-XXXXXX".
This can be viewed on the NaviTEK NT under the SETUP / REPORTS screen.
• You will be prompted for the NaviTEK NT Wi-Fi password if it has been changed from
the default value.
• Once connected the App will display a list of JOBs on the NaviTEK NT. These can be
selected and downloaded to the smartphone.
• Once results are on the smartphone they can then be transferred using email or other
share mechanisms.