Operation Manual

NaviTEK NT 151844 Iss 2
User Guide Page 19
Reports
Reports are very important because they are documented proof that the ports have
been tested. To select the required report style press F3 (MORE) then F1 (SETUP) in
the HOME screen, then select REPORTS. Alternatively, the setup screen can be
accessed by JOBS / OPTIONS / SETUP.
The example 4-page Brief report below shows the results of tests on 3 ports:
Page 1
This is the summary of all the tests.
(To include your own logo in the PDF reports,
select SETUP / SYSTEM / OWNER / F1
(LOGO). Insert a USB memory key containing
an image named logo.png with maximum size
of 250 x 160 pixels.)
Page 2
This is the Brief report for PORT0001.
It shows that this port failed the Wiremap
test.
(Note the Job and Owner details)
Page 3
This is the Brief report for PORT0002.
It shows that this port passed the Wiremap
test.
(Note the tester serial number)
Page 4
This is the Brief report for PORT0003.
It shows that this port passed the NET TEST
Details of the setup and results of the port
connection and the Discovery information
from the port are shown
Details of the ping tests are shown
Details of the Trace Route test are shown
A list of all the hosts found by the Netscan
test is shown, with a bar indicating how much
of the available address space is used