Operation Manual

Issue 4 - 02/07 EN-29
Resetting your MC2+
English
Resetting your MC2+
You will need to reset the MC2+:
when updating the firmware
when a malfunction occurs
Resetting will set the tester back to the factory defaults
settings.
Warning
ALL stored settings, including any pre-set configurations,
will be deleted.
-1- Switch MC2+ ON .
-2- Using a suitable stylus, press and hold the reset
button for 10 to 15 seconds.
See A Look at MC2+ on page EN-4 for the location
of the reset button.
-3- Wait for a further 30 seconds.
-4- Switch MC2+ OFF .
121800-4.book Page 29 Monday, March 5, 2007 10:09 AM