Operation Manual

Issue 4 - 02/07 EN-9
Using the MC2+ when connected to a PC
English
Status Information Section
This section displays the DSL, LAN and WAN status
summaries. Select the summary text to display more
details.
If the DSL status changes you will need to select the
Refresh button to update the screen. The screen
refreshes automatically while the Connections Details
are being updated.
DSL Status
LED
Grey: The DSL connection is down.
Flashing Green: MC2+ is training to the DSLAM.
The training status is not always displayed.
Green: Showtime has been achieved.
The upstream and downstream rate is displayed in
kbps and the modulation type.
Connection Controls Section
This section enables you to choose a WAN
Connection (see Testing an ADSL Line connection in
Stand-alone Mode on page EN-18.
Connect Select the Connect button to use the current settings
to establish a PPP connection. If On-Demand mode is
enabled the Connect button is disabled.
Disconnect See Disconnecting a Connection on page EN-21.
Configuring your MC2+
The following describes how to set up and save WAN
(Wide Area Network) connections; so that the MC2+
address, on the WAN (ADSL) side of the network,
matches the networks that you are going to test. For
details on setting up the LAN Configuration see
Setting up the LAN Configuration on page EN-15.
121800-4.book Page 9 Monday, March 5, 2007 10:09 AM