Operation Manual

Issue 4 - 02/07 EN-3
Looking after your MC2+
English
Connector Safety
The connectors on MC2+ conform to EN60950 safety
status classifications as shown in the following table.
Connection with other equipment should be made such
that the equipment continues to comply with clause 2.3
of EN60950 for SELV circuits, and with the requirements
of clause 6 for TNV circuits after a connection is made.
Looking after your MC2+
Although light and portable, MC2+ is very robust and
has been designed to operate in a typical outdoors
working environment.
To ensure reliable operation, avoid:
• very high or low temperatures—MC2+ is
designed to operate between 0°C and +40°C,
although you should only charge the battery
between +10°C and +30°C. You can store the
unit safely between -10°C and +50°C.
• very wet conditions—MC2+ is
weather-resistant but not waterproof. You can
use it in light rain when held vertically, but you
should never immerse the unit in water.
To avoid damage, we recommend that you keep MC2+ in
its carrying case when you are not using it.
Warning: Cleaning MC2+
Do not use solvents, strong detergents or abrasive
materials to clean MC2+. Use only cleaning agents
approved for use on ABS and polycarbonate plastics.
Safety
Connector Safety Status
DC Power in SELV (Safety Extra Low Voltage)
ADSL TNV3 (Telecommunications Network
Voltage - as classified in EN60950
Ethernet SELV
121800-4.book Page 3 Monday, March 5, 2007 10:09 AM