Operation Manual

MC2+—User Guide
EN-48 121800
-3- Enter ipconfig.
A window similar to the following is displayed.
-4- Make a note of the IP Address.
Viewing Results files on the PC
The results are stored in the folder that you set up in the
Destination Path. See Installing the TFTP Server onto
the PC on page EN-42.
Each result file is stored in csv: (comma separated
variable) format. This file format is compatible with most
spreadsheet programs. For example:
12340001.csv
12340002.csv
The histogram samples are displayed as numbers that
correspond to the histogram samples with the most recent
sample on the right-hand side.
Resetting your MC2+
You will need to reset the MC2+:
• when updating the firmware
• when a malfunction occurs
Resetting will set the tester back to the factory defaults
settings.
IP Address
121800-7.book Page 48 Monday, October 20, 2008 4:11 PM