Operation Manual

MC2+—User Guide
EN-36 121800
Transferring or Restoring a Configuration
-1- In the Update the MC2+ page select the Browse
button.
-2- Select the configuration you want to transfer to
MC2+.
The UpdateMC2+ dialog is displayed.
 Note
The Status field will remain blank regardless of whether
the configuration file was successfully or unsuccessfully
loaded.
-3- Select the Restart MC2+ button.
Using MC2+ in Through Mode
You can use your MC2+ to emulate an ADSL2+ modem
or router to connect a PC to the Internet.
-1- Switch on MC2+.
-2- Connect the RJ45 to RJ45 cable supplied to the
Ethernet port on MC2+ to the Ethernet port
of the PC.
or
Connect a suitable USB device cable to the USB port
on MC2+ to a suitable USB port on the PC.
-3- Start Internet Explorer or another suitable web
browser.
-4- Browse the Internet.
Please ignore this statement
121800-7.book Page 36 Monday, October 20, 2008 4:11 PM