Operation Manual

MC2+—User Guide
EN-26 121800
Choosing a Connection
-1- Connect MC2+ to a PC by following the steps in
Using MC2+ when connected to a PC on page EN-8.
The HOME page is displayed.
The Status Information section displays all the
stored WAN Connections. Established connections
are indicated by a green screen LED.
-2- In the Connection Controls section, open up the
Connections List.
Each stored Connection is displayed with its Name,
Username and PVC.
You can either choose a named Connection manually or
use MC2 + to choose a suitable Connection
automatically.
Selecting a Named Connection Manually
-1- Choose a saved Connection from the Connections
List that you want MC2+ to connect to.
-2- Select the Connect button.
The name of the Connection is displayed in the
Status Information section, while MC2+ attempts to
establish a connection. The page will flash as it
refreshes during the connection process.
The selected connection is displayed when MC2+
has found the connection. A green LED indicates
that the connection has been successful.
Selecting Connections Automatically
-1- Choose All Connections from the Connections
List.
-2- Select the Connect button.
The name of the Connections are displayed while
MC2+ attempts to establish a connection to each
one. The page will flash as it refreshes during the
connection process.
-3- When MC2+ has completed the connection process,
all the stored connections are displayed.
A green screen LED indicates that a connection has
been successful.
121800-7.book Page 26 Monday, October 20, 2008 4:11 PM