Operation Manual

MC2+—User Guide
EN-20 121800
Setting up the Bi-Colour LEDs
Depending on the configuration of your MC2+ you may
be able to set up the functions of the ADSL or PPP/IP
LEDs. The Bi-colour LEDs are supplied as ADSL
bi-colour LED only or PPP/IP bi-colour LED only. The
following steps (-1- to - 4 -) and page are not applicable
if you have the Display Option MC2+.
-1- From the HOME page select the SETUP button.
-2- Choose LED Setup
The LED Setup page is displayed.
-3- Find position X in the serial number and enter this
digit into the Step 2 field.
-4- Select the Next button.
The ADSL or PPP/IP LED Setup page is displayed.
For the ADSL bi-colour LED see ADSL on page EN-21.
For the PPP/IP bi-colour LED see PPP/IP (Standard
Option Only) on page EN-23.
Enter the digit here
121800-7.book Page 20 Monday, October 20, 2008 4:11 PM