Operation Manual

MC2+—User Guide
EN-18 121800
-5- Select the Apply button to save your settings.
-6- Select the Save All button to confirm and wait for
MC2+ to save your settings.
You can now switch off and disconnect MC2+ from the
PC as the configuration has now been saved on MC2+.
Setting up the Modem
-1- From the HOME page select the SETUP button.
-2- Select Modem Setup.
Lease Time Enter amount of time a LAN computer
will hold the IP address. The IP
address will automatically renew after
this time has elapsed. If the LAN
computer does not renew the address
after the lease period, the lease
information will be removed from the
DHCP database.
The DHCP Server allocates each IP
Address an amount of time
dynamically so that an address can be
reused when a device is no longer
using the IP Address for connection to
the network. Enter the time you want
MC2+ to allocate to each IP Address.
Enable DHCP Relay Enable for MC2+ to forward the
DHCP request to a remote DHCP
server. Enter the remote DHCP server
address in the Relay IP field.
Server and Relay Off Enable to switch off the server and
relay functions on MC2+.
LAN Connection Type Fields
Field Description
121800-7.book Page 18 Monday, October 20, 2008 4:11 PM