Operation Manual

MC2+—User Guide
EN-16 121800
 Note
You MUST re-enter the password, if applicable, before
you save your new settings.
-11- Select the Apply button to save your settings.
-12- Select Save All button to confirm and wait for
MC2+ to save your settings.
Setting up the LAN Configuration
The following describes how to set up the IP Address
details for the LAN (Local Area Network) configuration;
the Ethernet or USB side of the network. For details on
setting up the WAN Connections see Setting up New
WAN Connections on page EN-10.
-1- From the HOME page select the SETUP button.
-2- Select LAN Configuration from the LAN Setup
List.
-3- The LAN Configuration page is displayed.
LAN Setup List
Save All
121800-7.book Page 16 Monday, October 20, 2008 4:11 PM