Operation Manual

Issue 7 - 10/08 EN-15
Using MC2+ when connected to a PC
English
The following settings are displayed on all the WAN
Connection Type pages.
-8- Select the Apply button and wait for the page to
refresh.
If you want to create another Connection go to
Step 2 above.
-9- When you have completed all your entries, select
Save All from the Setup List (under System
Commands).
-10- Select the Save All button to confirm and wait for
MC2+ to save your settings.
Editing existing WAN Connections
You can only edit fields that are not greyed out.
Select and edit the fields as required.
QoS QoS defines the MC2+ capabilities
that provide a guaranteed quality of
service such as traffic delivery priority,
speed, latency, or latency variation.
Delivery of good-quality audio or video
streams typically requires QoS
capabilities. There are three QoS
options: UBR, CBR and VBR.
Choose a QoS that is supported by
your ISP. The default is UBR.
If you are not sure of the setting to
choose, leave it as the default (UBR).
Auto PVC Select to obtain a PVC automatically
from the network.
The following fields are not user accessible.
PCR Peak Cell Rate.
SCR Sustainable Cell Rate.
MBS Maximum Burst Size.
CDVT Cell Delay Variation Tolerance.
VLAN Settings Description
VLAN User accessible on PPPoE only.
VLAN ID This not user accessible.
Priority Bits Description
This not user accessible.
PVC Settings Description
121800-7.book Page 15 Monday, October 20, 2008 4:11 PM