Operation Manual

MC2+—User Guide
EN-14 121800
CLIP Classical IP Over ATM as defined in RFC1577. This
provides the ability to transmit IP packets over an ATM
network. CLIP Encapsulates IP in an AAL5 PDU (Packet
Data Unit) using RFC1577 and it makes use of an ATM
aware version of the ARP protocol.
-4- Enter a unique Connection Name.
This cannot begin with numbers, it must contain
valid characters and no spaces.
-5- Select and enter a VPI and VCI to match the
network settings.
-6- If a login is required, enter the Username and
Password.
-7- Depending on your network settings you may have
to set up more fields. The fields displayed depend
on the Type you have chosen. See the following
tables for information on the settings for each
connection type.
The following PVC settings are displayed on all the WAN
Connection Type pages.
CLIP Settings
Description
IP Address See Static Settings Table on page
EN 12.
Mask See Static Settings Table on page
EN 12.
ARP Server. If you are not sure of the settings,
leave it as the default
0.0.0.0.
Default Gateway See Static Settings Table on page
EN 12.
PVC Settings Description
VPI The Virtual Path identifier defines the
virtual path settings for the ADSL
connection between you and your ISP.
Enter a value that is provided by your
ISP.
VCI The Virtual Channel identifier defines
the virtual channel settings for the
ADSL connection between you and
your ISP.
Enter a value that is provided by your
ISP.
121800-7.book Page 14 Monday, October 20, 2008 4:11 PM