Operation Manual
88
CHAPTER 10
IDEAL DataCENTER Software
The software included permits test record management on your computer and Firmware-
Update of your LanTEK
®
II Cable Certifier. For this purpose, the program IDEAL
DataCENTER, the PDF Writer bioPDF and the program LanTEK Firmware-Upgrade are
installed on your computer.
10.1. Installing Software
To install the software on your computer and set up the IDEAL DataCENTER, make use of the
following description.
10.1.1. System Requirements
Microsoft Windows XP/Vista
Minimum processor (CPU) 300 Mhz Pentium
Minimum random access memory (RAM) 128 MB
Minimum available hard drive space 100 MB
Minimum graphic card Resolution 1024 x 768
10.1.2. Start Installation
The software components are installed by the supplied CD-ROM, using the standard
installation program of your Windows operating system.
5. Insert the CD-ROM and start your CD-ROM drive, if necessary.
6. Start installation.
7. Follow the instructions of the installation program. It is recommended to use the
default options.
8. The program IDEAL DataCENTER, the PDF-Writer bioPDF and the program LanTEK
Firmware-Upgrade are installed.
9. Follow the instructions until installation of all three (3) components is finished.
The start symbols will appear on your computer desktop
Data CENTER and LanTEK Firmware-Update.
The directories DataCENTER and LanTEK Firmware-Upgrade are stored in your IDEAL
Industries program file as subprograms.
c:\Programme\IDEAL Industries..
..\IDEAL DataCENTER
..\LanTEK Firmware-Upgrade
NOTE:
The hard drive information (example c:\..) depends on the designation of the hard drive
used with the computer.
The PDF-Writer bioPDF is installed together with the IDEAL DataCENTER program. In the
printer and fax directory, the IDEAL PDF printer is indicated.