Operation Manual

Chapter 8
Fiber testing (LWL) FiberTEK™ FDX
84
3. Use soft key 50.0/62.5 to select core diameter.
4. Use soft key 850nm/1300nm to select maximum insertion loss of according
wavelength.
Illustration 3 8.11.2. Fiber Standard
5. If you want to keep the loss budget, confirm with Enter, or use soft key
to open the menu to determine the loss budget.
6. Use soft key to open the menu to determine the loss budget.
7. Use soft keys 850nm, 1300nm, 1310nm and 1550nm to select the according
wavelength to specify the loss budget.
Illustration 4 8.11.2. Manual Specification of Loss Budget
NOTE:
Refer to chapter Specifications in this instruction manual to find an overview of cabling
standards and application requirements for the installation of fibers.
The current limit for the loss is displayed in box Limit.
8. If you want to keep the value, confirm with Enter, or use soft key to open
input box for loss budget.
9. Use Up/Down Arrow Keys to navigate to individual boxes and use
alphanumeric keys to enter details concerning the fiber line.
Length (m)
>
Loss/km
Fusion splices: Number
>
Loss
Connector Pairs: Number
>
Loss
Mechanical splices: Number
>
Loss