Operation Manual

Chapter 8

Fiber testing (LWL) FiberTEK™ FDX

Illustration 1 8.10. Select Wavelength

3. Use Arrow Keys to navigate on ready screen to "Analyze" display and confirm

with Enter.

Illustration 8.10. Analyze

8.10.1. Continuous Run

This mode is used for troubleshooting. During continuous run, the measurement is repeated

until it is manually cancelled. There is no save function.

1. Use Arrow keys to navigate to menu Continuous Run and press Enter.

Illustration 8.10.1. Continuous Run

The measurement is performed and the result displayed.

2. Use soft key Run to start continuous run of measurement until it is finished by

pressing soft key Stop.