Manualshelf

Operation Manual

ManualsBrandsIdeal Networks ManualsMeasuring ToolLanTEK II
71727374757677787980
Chapter 8
Fiber testing (LWL) FiberTEK™ FDX
79
Only Autotests with the overall evaluation Passed can be automatically saved. Tests with
failure rating must be manually saved.
The test results are automatically saved if Autosave Pref is enabled.
A name is automatically assigned to finished tests if Auto Increment function has been
enabled. If another name is preferred, use option to manually assign another
name.
8.9.3. Manual Saving of Autotest Results (Autosave off)
1. To manually save an Autotest, at the bottom edge of the screen press the soft key
.
2. Now a brief acknowledgement appears, indicating the name under which the test
will be saved.
3. If the current name already exists a warning message appears, asking whether
you want to overwrite the existing file or enter another name.
4. Press Escape to cancel and return to previous display without saving or
to overwrite existing file.
8.9.4. Working with Jobs
The Autotest is saved under an unique name. The test results can be viewed, printed or
deleted on the File screen.
1. On the ready screen, select File option and open job list.
2. Mark the desired job. Use to open the folder containing the option list.
3. Mark the desired function and confirm with Enter.
8.9.5. Display of Result Details
The Autotest is saved under an unmistakable name. The test results can be viewed, printed
or deleted on the File screen.
1. On the ready screen, select File option and open Job List.
2. Mark the desired job. Press Enter to open the job.
3. Use Arrow Keys to mark the desired test record.
4. Press Enter to open the record.
5. Press Escape to return to previous screen at any time.
8.10. FiberTEK™ FDX Measuring Mode
The LanTEK
®
II Cable Tester selects the reference level and test limits based on the test
selected. When testing fibers (LWL), the remote handset (RH) must be manually powered on.
1. Use Arrow Keys to navigate on ready screen to "Fiber" display and confirm with
Enter.
2. Highlight the wavelength, according to fiber to be measured and confirm with
Enter.