Operation Manual

Chapter 6
Structured cabling testing
59
Illustration 6.3. Single Tests
5. Confirm selection of test with Enter. After completion of test, a result table opens.
6.4. Evaluation of Analysis Test Results
The overall result of the analysis test is displayed in the upper right on the screen below the
title bar. The results for the individual wire pairs are displayed on the right side of the
respective test.
Overall Result
Individual Results
Illustration 6.4. Evaluation of Analysis Test Results
The above example shows the screen for DC resistance.
 The overall result of the test appears in the upper right, beside the date.
 The results of the individual wire pairs appear in the last column on the right (result
column).
The results for the overall test and the single tests are indicated similar to Autotest.
6.4.1. Graphs for Analysis Tests
After completion of test series, certain analysis results can be displayed in table or graph
format. The graph display in analysis mode is comparable to the one of Autotest.
6.5. Overview of Single Test Analysis
Analysis mode allows fault repair by performing single tests, making changes and displaying
changed test results. With the analysis test it is possible to check the cable continuously for
damage or overstretching.