Operation Manual
Chapter 5
Autotest
48
Illustration 2 5.7. Enter NVP
4. Use Alphanumeric keys to enter one or several NVP.
5. For automatic calculation of a new NVP, press .
Illustration 3 5.7. Calculation of NVP
6. Connect a cable of known length.
7. Use Arrow Keys and Number Keys to enter known cable length.
8. For automatic calculation of a new NVP, press . After calculation of new
NVP, the display returns to the NVP main screen.
NOTE:
This concerns a channel measurement. When entering the cable length, the length of both
patch cords must be considered.
5.8. Coaxial Cable Standards
The LanTEK
®
II Cable Tester supports the following coaxial cable standards:
CATV standards
Ethernet standards
Other cable types
RG59 31 or 92 m
(3-fold or 4-fold shield)
10Base 2
IBM Coax
RG6 31 or 92 m
(3-fold or 4-fold shield)
10Base 5
TWINAXIAL
ARCNET
1. Open "Cable Type" on start screen.