Operation Manual

Chapter 5
Autotest
41
5. Use available soft key options to specify a cable type, create a cable type, edit NVP
values or enter reference temperature.
5.5.1. Specify Cable Type
1. Use soft key to open select menu to specify the selected cable type.
2. Use Arrow keys to navigate to desired specification and confirm with Enter.
Illustration 5.5.1. Specification of Cable Type
3. Press Enter to save the information entered. Escape allows you to exit the menu
without making changes.
5.5.2. Create Cable Type
1. Use soft key to open select menu for individual creation of a cable type.
2. Use Arrow keys in Select Menu to navigate to option Frequency Range and
confirm with Enter.
Illustration 1 5.5.2. Select Menu
3. Use Arrow Keys to navigate to the individual boxes and use Alphanumeric Keys
to assign start and stop frequencies for Certification and Performance Range.