Operation Manual

Chapter 5
Autotest
40
AAA
A
/
AAA
A
-
00
.
000
Floor
Telecom room
Floor
Telecom room
Port
Pair
2. Use Left/Right Arrow Keys to navigate to desired position in Pair area. Use
Up/Down Arrow Keys to assign characters and numbers.
3. Proceed in the same manner with positions Port, Telecom Room, and Floor.
4. Proceed in the same manner with positions Telecom Room and Floor.
5. Use soft key to hide individual positions. Assembling the cable line
automatically generates the 606A-Name.
6. Press Enter to save the information entered. Escape allows you to exit the menu
without making changes.
5.5. Select Twisted Pair Cabling
1. Open "Cable Type" on start screen.
2. Use Arrow Keys to navigate to installation type of cable line to be tested (Twisted
Pair Perm, Twisted Pair Basic or Twisted Pair Channel) and confirm with Enter.
Illustration 1 5.5. Cable Type
3. Use Arrow Keys to navigate to desired cable type.
Illustration 2 5.5. Example Twisted Pair Perm
4. Press Enter to save the information entered. Escape allows you to exit the menu
without making changes.
Or