Operation Manual

Chapter 5
Autotest
34
5.3.1. Simple Cable ID
2. Use Arrow keys to navigate in "Cable ID" view to option Set… and press Enter.
Single Cable ID (1 cable name)
3. Use Alphanumeric Keys to enter a Cable Name for the test portion.
4. Use Alphanumeric Keys to reset the Current Value of the test meter, or enter an
arbitrary value.
5. Make corrections to entries by using the soft keys (delete at cursor
position), (delete characters to the left of cursor), /
(insert alphanumeric characters at cursor position / overwrite highlighted entry).
Illustration 1 5.3.1. Single Cable ID
6. Press Enter to save the information entered. Escape allows you to exit the menu
without making changes.
Double Cable ID (2 cable names, start/end)
7. Use Alphanumeric Keys to enter a Cable Name for the Cable From/Cable To of
test portion.
8. Use Alphanumeric Keys to reset the Current Value of the test meter, or enter an
arbitrary value.
9. Make corrections to entries by using the soft keys (delete at cursor
position), (delete characters to the left of cursor), /
(insert alphanumeric characters at cursor position / overwrite highlighted entry).
Illustration 2 5.3.1. Double Cable ID
10. Use soft keys and to switch between the views Cable From and
Cable To.