Operation Manual

Chapter 5
Autotest
33
5.3. Set Cable Name (cable ID)
The cable name of the cable lines in an Autotest consists of a fixed Cable Name and a
variable Current Value (4-digit test meter) that automatically increments. Depending on
selected Autotest Pref it is also possible to specify structure and way of counting.
1. Use Arrow keys to navigate to "Cable ID" and press Enter.
Illustration 5.3. Cable ID
The name used last will appear:
 Single Cable ID (1 name is assigned to each cable).
or
 Double Cable ID (2 names are assigned to each cable, one for the start and one for the
end of the cable).
Illustration 5.3. Cable ID
 Increment… when pressing Enter, the current value of the test meter, shown in view
below, is incremented by one position.
 Set… opens menu for cable name.
 Select… switches between Single Cable ID and Double Cable ID.