Operation Manual

Chapter 5
Autotest
30
Autotest Pref
Description
This will permanently
delete the Tests / Jobs
from the tester
Enables confirmation prompt prior to deleting data.
Disable Fiber Autotest
Length
Enable / disable length measurement of fiber (LWL) with FiberTEK™ FDX
during Autotest.
Enable 606A
Enable labelling standard TIA/EIA 606-A for telecommunication
infrastructure as cable ID.
NOTE:
If labelling standard TIA/EIA 606-A is enabled; the selected cable
name (simple cable ID/default cable ID) is not applied.
Enable Tera to Tera
Mode
Enables Tera to Tera Mode instead of Tera to RJ45 Mode.
Enable Wiremap On
Failed Autotest.
In case of failed Autotest, it determines whether another fault analysis
will automatically be performed.
5.2. Select Job Folder
The name of the current job folder is shown in the TFT display on the ready screen. To save
the Autotest it is possible to keep this job folder, enable another existing job folder, or create
a new job folder.
5.2.1. Enable Existing Job Folder
1. Use Arrow keys to navigate to "File" and press Enter to open the job list.
Illustration 1 5.2.1. File